A durable roof depends not only on the quality of the installation, but also on the type of roofing material that was used during the roofing work.
At the moment, there are a large number of roofing materials that have high strength, reliability and durability.
Today we want to introduce you to the process of laying metal tiles, which is very popular.
[b]Calculation of the material[/b]
In order to calculate the roofing material, it is necessary to carry out preliminary calculations that will help to accurately identify the required amount of material. We'll talk about this a bit later. Due to the fact that metal tiles are usually made to order, the installation process is much faster and easier.
During the calculation, it should be remembered that when installing metal tile sheets, a single sheet is not always used, so it is necessary to think over the protrusions in advance for high-quality ventilation of the roof.
[b]Waterproofing of the roof[/b]
During the process of installing metal tiles, it is necessary to create good waterproofing that will prevent moisture from entering the room. To do this, the selected insulation is attached to the rafters of the crate using special nails or staples. For greater reliability, the insulation is laid with a slight overlap on top of each other.
[b]Roof sheathing[/b]
The roof crate must be strong and reliable, as it will receive a large proportion of the load. Usually, the crate is created from wooden bars of a certain thickness and a cut board. In this case, all wooden elements of the crate are pre-treated with special antiseptic agents.
[b]Fixing metal tiles[/b]
When everything is prepared, the process of installing the crate and insulation has been carried out, you can proceed to fixing the metal tiles themselves. In this case, the fastening can be carried out from either side of the roof, however, if you decide to lay sheets of metal tiles on the left side of the roof, then the second sheet should be placed with a slight overlap under the wave of the first sheet of roofing material.
As soon as the first two sheets are laid, they should be secured with special metal fasteners, which can be used as metal self-tapping screws.
The finishing process in the installation of metal tiles is the installation of sheets in the ridge area. Sports promos during big events may include odds boosts like +7% on live football bets or +12% on NBA same-game parlays. Boosts change fast, so read the match list and active hours before you place anything. Register, and place the 1xbet free promo code today in the middle of the form to unlock event-specific boosts. Often you must bet $5+ and keep odds above 1.60, with some markets excluded. If you use cashout, the boost may vanish. Terms vary.